Humans first created shelters to provide thermal comfort and protection from natural elements, and this still remains a primary objective of buildings. The building envelope is the physical separator between the interior and exterior of a building.
Components of the envelope are typically: walls, floors, roofs, fenestrations and doors. Fenestrations are any opening in the structure: windows, skylights, clerestories, etc. When designing the building envelope, knowing some fundamentals of building materials and heat transfer will help you make the right trade-off decision.
Envelopes for Climate Types
A well-designed envelope responds to the local climate. As described in the Climate page, there are many classifications of climate around the globe, but a summary below shows four common extremes that people design for. Milder climates can use milder versions of these strategies, or mix and match.
Arid Climate Envelope
The City Palace in Jaipur, India.
Photo: Jeremy Faludi
Arid climates are very dry, and usually hot, but they often have large swings of temperature from day to night. Thus thermal mass on the outside of the building is the most crucial design strategy to even out such temperature swings. For consistently hot locations, it also helps to have high ceilings, shaded breezeways, light colors, and daylighting via reflected light (not direct sun), such as in this audience hall in the Jaipur city palace. Courtyards with natural ventilation and pools or fountains can provide evaporative cooling as well.
Tropical Climate Envelope
A traditional home in Papua New Guinea.
Photo: Jeremy Faludi
Tropical climates are hot and humid. Therefore, keeping the heat of the sun off is the top priority, as well as maximizing ventilation—essentially a reflective insulated roof with walls that pass breeze but not rain is ideal. This traditional Papua New Guinean home’s thick light-colored thatch roof keeps out the sun’s heat, while open eaves and porous bamboo slats for walls and floor maximize natural ventilation. The materials are all low-mass to avoid condensation and mold growth, which can happen with high-mass materials in humid climates. (Note: Jalousie windows are found in the tropics, but are not as common elsewhere, because they are so porous to breezes.)
Cold Climate Envelope
A vernacular-design cabin in Finland
Cold climates have many more heating degree days than cooling degree days. Thus maximizing insulation is the key to keeping warm, as well as using windows for solar gain on thermal mass inside the building envelope (not outside as in arid climates). Part of having effective insulation in cold climates is an air-tight envelope, avoiding infiltration. This Finnish cabin has very few and very small windows except on the south side, to maximize solar gain while minimizing losses elsewhere. Before modern insulation, thick solid log walls such as these provided better insulation than board walls could.
Mixed Cold / Hot Climate Envelope
The Aldo Leopold Center in Baraboo, Wisconsin.
Photo: Jeremy Faludi
Many “temperate” inland climates actually have two extremes–cold in winter, hot and humid in summer. Flexibility is the key to designing for these climates. The Aldo Leopold Center in Wisconsin, first building to be LEED certified as carbon-neutral, uses deep overhangs to allow low winter sun in through the windows to heat up a high-mass concrete slab inside, while blocking high summer sun. It also uses a light roof and darker walls to repel summer sun but absorb winter sun. Extra insulation retains heat in winter, but operable windows passively cool it in summer.
Envelope Energy Flows
From an energy flow perspective, the envelope is a composition of layers with varying thermal and permeability properties. The envelope may be composed of membranes, sheets, blocks and preassembled components. The choice of envelope is governed by the climate. The range of choices in envelope design can be illustrated by two opposite design concepts: the open frame and the closed shell.
In harsh climates, the designer frequently conceives of the building envelope as a closed shell and proceeds to selectively punch holes in it to make limited and special contact with the outdoors. This may also be true where there are unwanted external influences such as noise or visual clutter. When external conditions are very close to the desired internal ones, the envelope often begins as an open structural frame, with pieces of the building skin selectively added to modify only a few outdoor forces. The flow of heat through a building envelope varies both by season (heat generally flows from a building in winter and to a building in summer) and by the path of the heat (through the materials of a building’s skin, or by outdoor air entering). These complexities must be considered by a designer who intends to deliver comfort and energy efficiency.